• Free Shipping

    Free shipping on all orders

  • No Sales Tax

    You don't pay any sales tax

  • US Based

    Located in Danbury, CT

About

The ShowCase Deluxe Guitar Display Cabinet is a wall-mounted display handcrafted in the USA for acoustic and electric guitars. It is made from sapele mahogany with a herringbone inlay along the front edge. Full-length LED lighting lights both the guitar and the back panel.

The interior offers extra headroom and width, so it can take larger-body, custom or uniquely shaped guitars. See the FAQs for measurement guidelines. A ¼" glass door with a nitrocellulose-safe gasket shields the instrument, and a Boveda® humidity control system is built in.

The cabinet includes a keyed lock. The locking handle replaces the standard magnetic knob.

Features

Interior: The cabinet holds acoustic and electric guitars. The extra headroom and width allow larger-body, custom or uniquely shaped instruments, within the measurements given in the FAQs.

Materials and finish: The exterior and interior walls are ribbon-stripe sapele mahogany, with a herringbone inlay on the front edge. The original birch back panel provides a neutral backdrop.

Lighting: Full-length LED lighting softly lights the guitar and the background. The lighting is angled, which helps metal parts such as pickups, tuners and jacks stand out. It also suits autographed guitars.

Power: The cabinet can run from a power cord plugged into an outlet, or from a battery pack that needs no outlet and leaves no visible wire. Simple instructions for either option are included.

Humidity control: A recessed tray holds a Boveda® packet. With the glass door and the nitrocellulose-safe (non-rubber) gasket, it can help add or remove humidity inside the cabinet. One 72% seasoning packet and one 49% humidity control packet are included. In an extremely dry or humid climate, larger 320 gm Boveda packs can be placed in the bottom of the cabinet. The cabinet is not hermetically sealed. If you need more precise humidity regulation, the manufacturer recommends a humidified guitar cabinet with a hermetic seal and a built-in humidifier/dehumidifier module.

Lock: The cabinet includes a keyed lock. The locking handle replaces the standard magnetic knob.

Backdrops (optional): Photo-realistic backdrops can be added to the interior. They are easy to install and swap, and both sides of the backdrop panel can be used to switch between designs. They are removable, so you can return to the original birch or buy a new design. Custom backdrops are available on request. Backdrops ship separately, and the artwork usually takes about 10 business days to arrive.

Mounting: A heavy-duty cleat is included for wall mounting.

Made in the USA: The cabinet is designed and manufactured by a small team in the USA.

Specifications

  • Weight: 77 lbs (shipping weight)
  • Dimensions: 51" H x 22.5" W x 9" D
  • Internal cabinet width: 21"
  • Glass: ¼" door, no UV protection
  • Gasket: inert foam, nitrocellulose-safe
  • Lock: keyed lock, replaces the magnetic knob
  • Power: plug-in power cord or battery pack (8 AA batteries)
  • Humidity control: 1 x 72% Boveda® seasoning packet and 1 x 49% Boveda® humidity control packet included
  • Mounting: wooden cleat system (included), with 4 screws and 4 toggle bolts
  • Tools required: drill, level, screwdriver
  • Made in the USA

FAQs

Q: How do I know if my guitar will fit in the ShowCase?
A: The internal cabinet width is 21 inches. Measure your guitar from the point where the headstock widens over the neck down to the bottom. That length should be less than 37 inches. The guitar's widest point should be less than 21 inches, and the body depth should be 6 inches or less. Most bass guitars will not fit.

Q: How does the humidity control system work?
A: Boveda 2-way humidity control packets help protect a wooden instrument from warping, cracks and other damage caused by too little or too much humidity. The packet sits in a recessed tray and helps maintain 40%-50% relative humidity inside the case. In an extremely dry or humid climate, you may want the larger 320 gm Boveda packs, which can be placed in the bottom of the cabinet.

Q: How long does the Boveda packet last before it needs replacing?
A: Replace it when it becomes dry and crispy. Boveda says to expect 2-6 months of use, depending on the container and the external environment.

Q: How does it mount to the wall?
A: The cabinet hangs on a cleat that you attach to the wall, which requires drilling 4 holes. The holes in the cleat are 16 inches apart. If you can locate studs 16 inches apart, attach the cleat with the 4 included screws into 2 studs. If you can't find the studs, 4 toggle bolts are also provided. If your studs are not 16 inches apart, use 2 screws into a stud and toggle bolts for the other 2 holes. Detailed instructions are included.

Q: If I use batteries, how many do I need? How long will they last?
A: The battery pack uses 8 AA batteries. In testing, the lights stayed on continuously for over 48 hours before starting to fade slightly.

Q: What will I need to assemble the ShowCase?
A: A drill, a level and a screwdriver. All hardware is included, along with detailed, illustrated instructions.

Q: Is the glass UV protected?
A: No, the glass does not contain UV protection.

Q: Why does the gasket need to be nitrocellulose-safe?
A: The gasket is made of an inert foam material. Gaskets that contain rubber can break down over time and give off corrosive gases in a sealed enclosure. That can harm vintage guitars with a nitrocellulose finish.

Customers also bought

    • 5 stars: 1 (100%)
    • 4 stars: 0 (0%)
    • 3 stars: 0 (0%)
    • 2 stars: 0 (0%)
    • 1 star: 0 (0%)
    J
    Junkiejunkemail

    Bought this for my '68 Telecaster and honestly it looks incredible on the wall. The sapele mahogany finish is really well done — it doesn't look like furniture store stuff, it looks like something a woodworker actually cared about. The LED lighting makes a big difference too, especially at night. Really shows off the guitar.